Bittium Tactical Wireless IP Network™

Resilient, high-performance IP backbone network for modern command and control.

Connectivity Across the Battlefield

With the software defined Bittium Tactical Wireless IP Network (TAC WIN) system battlegroups can create high-data-rate wireless IP networks as a backbone to support command and control (C2) data transmission during military operations. Compared to existing tactical data link networks, flexibility to use the Bittium solution in different frequency bands and network structures, including MANET, provides cost effectiveness, ease of use, and efficiency.

  • TAC WIN network can be deployed in any location. It enables formation of an independent IP network and is compatible with existing infrastructure, both wireline and wireless.
  • As it is software-defined, the system is versatile, can be easily upgraded and it is easy to adapt. The system enables a mesh network solution with high-data-rates and automatic network configuration required by battlegroups on the move.
  • TAC WIN network has excellent performance and form factor as both network node and router functionalities are integrated into a single product. 

The TAC WIN system can serve land, naval, and air forces, or any other use case in the military domain.

 

“The high capacity, flexibility and seamless interoperability make Bittium TAC WIN the perfect wireless IP backbone network for commanding the mobile troops of the Army”

Colonel Eero Valkola, Inspector of Signals, Army Command, Finnish Defence Forces

System Benefits

Flexibility

  • Single system for MANET, Point-to-Multipoint and Link use
  • Wireless and wired connections seamlessly integrated to one network using OLSR routing
  • Supports multiple frequency bands: NATO I, III and IV

ECCM Capabilities

  • Frequency hopping, adaptive modulation and MANET routing ensures connectivity also during electronic warfare conditions
  • Independent from GNSS using Bittium AIS synchronization

 

High Data Throughput

  • Up to 50 Mbps data throughput with TAC WIN Waveform  
  • All-IP wideband connectivity across the battlefield

 

Quality of Service

  • Operation of high priority services guaranteed even during conditions with limited connectivity

Security

  • Bittium TAC WIN Waveform has TRANSEC that encrypts all data using AES-256

Long Range

  • Up to 45 km range per hop in Link/Point-to-Point use

 

Easy Integration

  • Standard IP interfaces and protocols supported
  • Built in support for integration of legacy CNR-radios using audio and serial data
  • Time and location information available for 3rd party systems

 

Built-In Tactical VoIP Service

  • With built-in Bittium Tough VoIP Service, TAC WIN offers seamless and reliable voice in tactical network.
  • Supports tactical voice features, user and device mobility, integration to 3rd party SIP systems

Easy Management

  • Simple setup procedure
  • Self-organizing network, no need for user interaction during operation
  • Intuitive and visual Bittium Tactical Network Management™ system for the networks and nodes

Elements

Bittium TAC WIN Tactical Router™

The system's routing and radio baseband processing unit running the Bittium TAC WIN Waveform and offering a reliable high performance network in versatile and demanding environments.

Bittium TAC WIN Radio Head I™

For creating a Mobile Ad hoc Network (MANET), which is the optimal solution for troops in a relatively small area who require a mobile and flexible network. Frequency band 225-400 MHz.

Bittium TAC WIN Radio Head III™

For creating a Point-to-Multipoint network, which provides ideal solution for access networks to provide services from link network to Bittium TAC WIN MANET. Frequency band 1350-2400 MHz.

Bittium TAC WIN Radio Head IV™

For creating a Radio Link network, which brings high capacity connections to the command site, or backbone to fixed core network. Frequency band 4400-5000 MHz. Available in two variants, with integrated beam steering antenna or with integrated fixed beam antenna and external rotator integration, depending on the requirements.

Bittium TAC WIN Waveform™

The foundation for a high performance network. Supports up to 1000 nodes in one network and several services, such as Multicasting and QoS.

Bittium Tactical Network Management™

Intuitive and visual toolset for network planning, real-time management of the networks,  and performance analysis based on big data collected from the network.

Technical Specifications

Open/close section Tactical Router

  • Routing and waveform processing unit
  • Operating voltage: 10 - 60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class: IP67
  • Dimensions 223 x 356 x 400 mm (h x w x d)
  • Weight 19,4 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)

 Interfaces

  • 3 x TAC WIN Radio units
  • 4 x WAN (2 x RJ45 1000BASE-T / 2 x Fiber 1000BASE-LX)
  • 4 x LAN (1000BASE-T) with PoE (802.3af)
  • 8 x ITU-T G991.2 (GSHDSL)
  • 4 x serial/audio connector
  • 2 x USB
  • GPS in/out
  • ERASE -button and ON/OFF -switch

Routing services

  • Custom OLSR in TACTICAL network
  • Custom multicast in TACTICAL network
  • OSPF / BGP routing for external connections
  • Automatic IP address configuration
  • VLANs and configurable bridges
  • QoS: Traffic classifying and priority queues (8 queues)
  • SNMP v3
  • Radius server support
  • AAA
  • 802.1X port authentication
  • Call admission control

Tactical VoIP service

Other services

  • Network configuration with single configuration file
  • SNMP interface
  • IPsec tunneling
  • Netflow
  • Firewall
  • 3 different user levels
  • Easy to use local web GUI



 

Open/close section Radio Head I

  • Frequency band 225-400 MHz
  • Signal bandwidth 5 MHz
  • Data throughput with Bittium TAC WIN Waveform: 12Mbps
  • Supports 2x2 MIMO
  • Channel raster 250 kHz
  • TAC WIN Waveform Tx power: 2 x 4 W
  • Operating voltage: 10-60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class IP67
  • Dimensions 160 x 256 x 454 mm (h x w x d)
  • Weight 18 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)
Open/close section Radio Head III

  • Frequency band 1350-2400 MHz
  • Signal bandwidth 5/10 MHz
  • Data throughput with Bittium TAC WIN Waveform: 26Mbps
  • Channel raster 250 kHz
  • TAC WIN Waveform Tx power: 4 W
  • Operating voltage: 10-60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class IP67
  • Dimensions 160 x 256 x 454 mm (h x w x d)
  • Weight 18 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)
Open/close section Radio Head IV

RH-IV and RH-IV High Gain

  • Frequency band 4400-5000 MHz
  • Signal bandwidth 5/10/20 MHz
  • Data throughput with Bittium TAC WIN Waveform: 50Mbps
  • Channel raster 250 kHz
  • TAC WIN Waveform Tx power: 1250 mW
  • Operating voltage: 16-60Vdc
  • Temperature range
    • -40 - 55 °C (operating)
    • -40 - 70 °C (storage)
  • Ingress protection class IP67
  • Dimensions 385 x 520 x 67 mm (h x w x d)
  • Weight 10 kg
  • Tested with MIL-STD-810G and MIL-STD-461G
  • Passive cooling (no fans)
  • One hybrid cable interface (power and data)

RH-IV variant: Integrated patch antenna with 50° beam steering (gain 19dBi / beamwidth 9° / vertical polarization). Can be used with external antenna.

RH-IV High Gain variant: Integrated fixed beam antenna with 9° beam (gain 23dBI / vertical polarization) and external rotator control interface.

Open/close section Waveform

Key features

  • Slow/fast frequency hopping
  • Operation without GNSS
  • Network time distribution via Air Interface
  • Optimized interference cancellation algorithms
  • Supported bandwidths: 5 / 10 / 20 MHz
  • QoS based network radio resource management
  • Supports > 1000 nodes in one network
Open/close section Tactical Network Management

Bittium Tactical Network Management system provides intuitive and visual tools for tactical network planning, real-time management of the networks and performance analysis based on big data collected from the network. This enables quick and effective deployment of the networks and successful operations.

Tools included

  • Tactical Network Planner Tool
  • Tactical Network Manager Tool
  • Network Analytics Tool

Supported networks and nodes

Supported services

Supported waveforms

  • Bittium TAC WIN Waveform™
  • Bittium Narrowband Waveform™
  • ESSOR Wideband Waveform

Seamless Interoperability

Interfaces for Wired and Wireless Connectivity

 

Selected References