EEG-TMS: Bittium NeurOne system is designed to be used together with transcranial magnetic stimulators (TMS). High dynamic input range (+/- 430 mV in DC mode and +/-86 mV in AC mode) combined with wide analog band (DC..3500 Hz) keeps TMS induced artifacts short allowing analysis of brain activations even in short latencies. Additionally hardware mute function and software based online artifact reduction can be used.
As a new feature we have added is EEG sample synchronized triggering. Trigger generated by stimulation system (Presentation, Superlab, E-Prime) can be routed through the Bittium NeurOne Main Unit to TMS device. Bittium NeurOne feeds out trigger pulse in constant phase to EEG sampling allowing accurate reproduction of TMS induced artifact for easier artifact removal.
EEG-MRI: Bittium NeurOne Tesla enables concurrent MRI and EEG measurements. When using Bittium NeurOne Syncbox EEG acquisition is synchronized to MRI scanner clock (e.g. 4 or 10 MHz). Once again high dynamic input range (+/- 430 mV in DC mode and +/-86 mV in AC mode) combined with wide analog band (DC..3500 Hz) yields accurate signal with no risk of saturation when using high gradient strengths.
EP & ERP research: The Bittium NeurOne system can handle virtually any evoked potential (EP) and event related potential (ERP) measurement task because of its extensive triggering interfaces, amount of measured channels, low noise and high sampling frequency.
EMG research with very high resolution and high amount of channels: The Bittium NeurOne system has up to 32 channels of dedicated bipolar channels perfect for EMG use. The amount of usable channels can be increased even further by utilizing also the referential channels.
Group studies: Modularity of the system enables measuring up to 4 persons simultaneously on one system with fully synchronized video camera support. When used with our Brainstorm technology (Multi Syncbox) up to 10 Bittium NeurOne hardware systems can be synchronized together allowing 30 amplifiers to run with one clock – all recorded with one computer.
Other neuroscience and psychological measurements: You name the signal, Bittium NeurOne can measure it. For example, all the sensors for ME6000 can be connected to NeurOne. Additionally, we can customize Bittium NeurOne system according to your purposes. Ask for a quote and describe your application.
BCI Applications: We have BCI2000 available on request for Bittium NeurOne free of charge. SIMULINK driver is available as ordering option.
Video: Video package consists of camera with HDMI output (+ Mic In for synchronization), USB3 capture box, MPEG-2 codec and VideoSync unit that sends triggers to NeurOne EEG stream every 10 seconds. Same trigger is fed to audio track of video to allow accurate synchronization throughout the recording.
Data format compatibility: The data format of Bittium NeurOne is compatible with most popular EEG analysis modalities, including Matlab, EEGLAB, BrainVision Analyzer and BESA.
Download here our EEGLAB reader plug-in and Matlab functions to read Bittium NeurOne data